EFFLORESCENCE-RID is a UNIQUE SCIENTIFIC Developed INDUSTRIAL STRENGTH SALT (efflorescence) remover specially designed to effectively remove efflorescence in industrial, commercial and residential situations.
The formulation contains no solvents but is corrosive. Is non-flammable, non-carcinogenic, is biodegradable. Observe Safety & Health Precautions – Product is Corrosive (Class 8).
On application to the affected areas, EFFLORESCENCE-RID penetrates the surface and liquifies the salts (efflorescence) and brings it to the surface of the substrate, where this is washed away, then after 20 minutes or longer EFFLORESCENCE-RID is re applied to the same area.
Please ask your questions here.
ONE-COMPONENT FLEXIBLE WATERPROOF COATING AGAINST POSITIVE AND NEGATIVE PRESSURE FOR CONCRETE AND MASONRY
So, where can you use this brilliant efflorescence remover? We have listed the general applications for this efflorescence from concrete surface remover below.
General removal of efflorescence. Removing Salt from and new or old constructions affected by efflorescence, historical and public buildings.Walls, Concrete floors suffering efflorescence Masonry, brick, block structures.
Want to why this product is considered the best in removing the efflorescence from bricks and other concrete surfaces? Let’s find out below!
Dissolves efflorescence deposits, allowing removal. User friendly, it does not require special protection equipment. Protect surrounding areas, wet down plants and trees, cover metal and glass. Environmental friendly (is considered a green product) non-flammable.
How To Use EFFLORESCENCE-RID?
There are lots of essential things that you must do to ensure the best results on your surfaces. You need to prepare the surface before applying the efflorescence concrete cleaner. Similarly, you must only use it as per the quantity mentioned in the brochure. So, let’s see these technical details regarding the Efflorescence-Rid.
- Prepare The Surface: As per the brochure, you should test this remover on other surfaces before applying it to the target site. You may or may not see bleached surfaces in this experiment. Then, water the grass and shrubs around the surface properly. And next, clean the surface from all the dirt, soil, and other materials!
- Applying The Cleaner: Now that the surface is prepared, you can apply this efflorescence’s concrete cleaner using a plastic pump sprayer. Wait for about 3-5 minutes before the cleaner removes the efflorescence off the surface. Then next, do a power wash to clean all the remaining dirt using this product as well.
- Rinse: After removing efflorescence from the surface and bricks is done, rinse the area properly. Use plenty of water to do so! You can also use a sealer over the surface once the efflorescence is removed.
Essential Points To Remember!
The air temperature is above 7°C, and that of the surface is above 15 °C. You must check many other details before applying this efflorescence from the concrete surface cleaner!
We have provided all the details of Efflorescence-Rid on our website! So, call Scientific Waterproofing Products today or visit our website!
Please ask your questions here